[Courtesy of Samsung]
Hydrogen fluoride, also known as etching gas, is used to wash away foreign substances in the process of piling up silicon wafers. Japanese firms have dominated the global high-purity hydrogen fluoride market. It is a key material included in Japan's strengthened regulations on exports to South Korea on July 4.
"We are gradually increasing our purity after importing, synthesizing and refining raw materials," a Wonik official said. "After finishing our test this year, it will be applied to Samsung's semiconductor line next year."
The hydrofluoric acid solution is used for wet etching while etching gas is used for dry etching. "It is much more difficult to make a gas form than a liquid form," the official said, adding Wonik plans to diversify raw material imports from Japan to other countries. "Etching gas, which is dominated by Japanese companies, was assessed to be about 15 years behind Japan five years ago, but now we have narrowed the gap considerably."
Copyright ⓒ Aju Press All rights reserved.
Related News
-
Plan for Wastewater Treatment Facility at Honam Semiconductor Complex by 2029
The wastewater treatment plan for the Honam Semiconductor National Industrial Complex has been established. To manage the anticipated daily discharge of 500,000 tons of wastewater, the existing public wastewater treatment facilities will be expanded. According to Gwangju, the Honam Semiconductor National Industrial Complex is expected to use 650,000 tons of water daily based on the operation of Fab 4, resulting in an estimated wastewater discharge of 500,000 tons. This figure is based on a wastewater conversion rate of 77% for the semiconductor industry. Companies will handle the initial treatment of specific substances such as copper, fluoride, and ammonia, which require separate processing based on the characteristics of each fab. After initial treatment, the discharged wastewater will be processed at public facilities to meet various legal water quality standards before being released into the Yeongsan River, adjacent to the fabs. Gwangju plans to gradually expand public wastewater treatment facilities according to the operational phases of the fabs. Initially, a basic plan for a facility capable of treating 320,000 tons of wastewater per day will be established by April next year. The first wastewater treatment facility is scheduled for completion by December 2029. It is expected that the facility will be able to handle wastewater until the first half of 2031, when the expansion of at least two additional fabs is anticipated. Following the expansion of the fabs, an additional 180,000 tons of daily wastewater will be managed through further facility expansions.* This article has been translated by AI.
-
AI necessity draws Korean chipmakers closer to Japan
Graphics AI Assisted SEOUL, November 02 (AJP) - History has often intruded on business between South Korea and Japan, two of Asia’s technology powerhouses. In 2019, a dispute over compensation for wartime forced labor spilled into semiconductor supply chains. Japan tightened export controls on critical chipmaking materials, and the two countries removed each other from lists of preferred trading partners. Since then, Korean manufacturers accelerated efforts to replace Japanese supplies with domestic products and alternative sources. The AI boom is now giving both sides stronger reasons to keep those supply chains connected. Samsung Electronics and SK hynix supply the advanced memory essential to AI computing. Japanese companies provide materials and equipment needed to manufacture and package increasingly complex chips. Disrupting that relationship would carry consequences far beyond the two countries. Necessity can mother cooperation. Within days of each other, South Korea’s two memory giants have stepped up engagement with Japanese suppliers, seeking closer coordination on technology development, investment and future production needs. Samsung Electronics Executive Chairman Lee Jae-yong visited the company’s Advanced Package Lab (APL) in Yokohama on Sunday to review next-generation packaging research and discuss cooperation with Japanese materials and equipment companies. Samsung Electronics Chairman Lee Jae-yong visits the company's advanced semiconductor packaging research facility in Japan on Nov. 1. Courtesy of Samsung Electronics Three days earlier, SK hynix held its first Partners Day in Japan, bringing together executives from more than 20 suppliers to share its business strategy and technology roadmap. The aim was to give partners enough visibility to prepare their own investments and production capacity as AI memory demand grows. The initiatives build on complementary strengths. South Korea leads in advanced memory manufacturing, while Japan retains a strong position in the materials, equipment and components that make production possible. For Samsung, the immediate focus is advanced packaging: integrating memory, processors and other components into systems whose performance increasingly depends on how efficiently those chips work together. Its Yokohama laboratory formally opened in September. Samsung is investing 40 billion yen over five years beginning in 2024 to establish the research base, with work spanning wafer bonding, glass substrates and other technologies intended to improve performance and power efficiency. The facility connects Samsung’s chip design and manufacturing capabilities with Japan’s concentration of specialist suppliers and researchers. SK hynix’s Oct. 29 gathering in Chiba Prefecture covered a broader cross-section of its manufacturing supply chain. Participants included materials companies Shin-Etsu, SUMCO, JSR and Namics; equipment makers Tokyo Electron and SCREEN Holdings; and back-end processing and testing specialists DISCO and Advantest. Chief Production Officer Lee Byung-ki emphasized the countries’ complementary strengths and the contribution of Japanese partners to SK hynix’s technological competitiveness. Sharing roadmaps earlier allows suppliers to align technology development and capacity decisions with the chipmaker’s expected needs. The direction matches recommendations from the Korea Institute for International Economic Policy (KIEP), a government-funded research institute. In an April report on Japan’s semiconductor supply chain, researcher Gyu-Pan Kim identified joint development of advanced packaging and cooperation in AI semiconductors as priorities. The report also proposed exploring longer-term cooperation with Rapidus, Japan’s government-backed advanced chipmaking venture. Its analysis of 2020 input-output data found that South Korea’s dependence on Japan reached 63 percent for primary plastic products and 58 percent for abrasives used as intermediate inputs in integrated circuit production. The figures illustrate how deeply Japanese suppliers remained embedded in Korean manufacturing even after the 2019 dispute. SK hynix's first Partners Day in Chiba Prefecture, Japan, on Oct. 29, 2026. Courtesy of SK hynix. Such interdependence should not be confused with Japanese leadership in high-bandwidth memory (HBM), the stacked memory used alongside AI processors, said Hong Sang-jin, a semiconductor professor at Myongji University. "That's not the case. South Korea has far more advanced technology and expertise when it comes to HBM," Hong told AJP. He suggested that Korean chipmakers may also be considering how to meet substantially higher memory demand if their existing expansion plans prove insufficient. Building a semiconductor factory takes years. Companies therefore need to examine alternatives well before a shortage becomes urgent, he said. "What if we need to produce much more HBM in the future?" Hong said, describing the question facing executives. "If building a new factory takes six or seven years, what happens if we can't get it ready in time?" Japan could be one option if expansion at home becomes difficult. "Of course, it would be best if we could do it in South Korea. But what if we can't? Shouldn't we have a Plan B?" Hong said. Such planning does not amount to a commitment to build overseas, he stressed. The confirmed initiatives concern research and supplier coordination; potential manufacturing investment remains a separate question. Reports in August raised the possibility of an SK hynix memory plant in Japan’s Miyagi Prefecture. In response, the company said it was reviewing various ways to strengthen its memory business, including additional production bases, but had finalized nothing. Speculation resurfaced after SK Group Chairman Chey Tae-won discussed investment opportunities in Japan and closer economic integration between the two countries. SK Group subsequently disputed reports suggesting he had confirmed consideration of a specific joint semiconductor factory, saying his remarks concerned broader investment possibilities. SK Group Chairman Chey Tae-won delivers opening remarks at the 15th Korea-Japan Chamber of Commerce Leaders' Meeting in Sendai, Japan, on Aug. 31, 2026. Courtesy of KCCI. The company already has financial ties to Japan’s memory industry through Kioxia, formerly Toshiba Memory. SK hynix committed 395 billion yen to the Bain Capital-led consortium that acquired Toshiba’s memory business in a transaction completed in 2018. Japan’s efforts to revive its semiconductor industry, including support for Rapidus, add another reason for Korean manufacturers to stay closely engaged with its industrial base. The political backdrop has also improved. Japan relaxed the tighter controls on hydrogen fluoride, photoresists and fluorinated polyimides in March 2023. South Korea restored Japan to its preferred trading list in April, and Japan restored South Korea’s status in July. The experience of 2019 nevertheless left Korean chipmakers with a lasting incentive to diversify supplies. Their latest moves suggest that reducing vulnerability can also involve deeper coordination with established partners. For Hong, the distinction between preparation and commitment remains essential. "They're securing possibilities, but that doesn't mean they're signing contracts right now," he said. History has shown how quickly politics can unsettle the relationship. AI is raising the economic stakes of keeping it intact.
-
Minister Lee So-young Visits Korea Kolmar Factory to Confirm K-Beauty Competitiveness
Minister Lee So-young of the Ministry of SMEs and Startups visited Korea Kolmar, a cosmetics manufacturer, to assess the competitiveness of the 'K-Beauty' industry and listen to industry concerns. According to the ministry, Lee visited the Korea Kolmar factory in Sejong on the afternoon of October 16, where she toured the production site and held a meeting. Attendees included Lee, Sim Jae-yoon, director of the ministry, and Park Seung-rok, head of the Daejeon-Sejong Small and Medium Business Administration, along with Korea Kolmar's CEO Choi Hyun-kyu and other executives. Korea Kolmar is a leading company in the K-Beauty industry, supporting the growth of small and indie brands by assisting in product development, production, quality control, and international expansion. Choi Hyun-kyu stated, "Each country has different regulations regarding cosmetics. Some countries prohibit fluoride in products, and functional cosmetics or pharmaceuticals are categorized based on ingredients," adding that Korea Kolmar provides relevant information to indie brand companies. Thanks to the growth of K-Beauty, small business exports surpassed $640 billion in the first half of this year, marking the highest record to date. Cosmetics exports reached $50.7 billion, a 30.7% increase compared to the same period last year, making it the top export item for small businesses. In the first half of this year, basic cosmetics accounted for $54.8 billion, or 74.7%, of total domestic cosmetics exports. Korea Kolmar also sees a significant portion of its revenue from skincare (50%) and sun care (26%). The Sejong factory serves as a key production base to meet this global demand, producing 890 million cosmetics annually. Recently popular sun care and skincare products from Korea Kolmar are also produced entirely at this facility. In the second quarter of this year, Korea Kolmar became the first company in the domestic ODM industry to surpass 100 billion won in quarterly operating profit. During the meeting, various opinions were exchanged regarding the continued growth of K-Beauty. Choi explained, "The biggest challenge for indie brand companies is the prevalence of imitation products, especially from Asia, including China." The ministry is currently exploring countermeasures in collaboration with the Intellectual Property Office. Meanwhile, Korea Kolmar plans to strengthen its production capacity centered around the Sejong factory to respond to global K-Beauty demand. Earlier this year, it was selected as a reshoring company after closing its factory in Beijing, China, and expanding its Sejong facility. The company currently operates a basic cosmetics factory in Sejong, a color cosmetics factory in Bucheon, and a comprehensive technology center, while also maintaining production facilities in the United States, China, and Canada.* This article has been translated by AI.